4WD Metal Smart RC Robotic Platform Car Chassis Kit with Omnidirectional Wheel & High Torque 37 Encoder DC Motor for Arduino/ Raspberry pi/ Micobit

NewLimited quantity

4WD Metal Smart RC Robotic Platform Mecanum Wheel Car Chassis MC600

The panel of mecanum wheel car chassis is made of 3mm thick aluminum alloy board, which is strong and beautiful;

Equipped with four 100mm mecanum omni wheels, the robot can perform front and rear, left turn, right turn, etc.;

Equipped with 4 high torque DC encoder motors, it provides enough horsepower for the car chassis, and the chassis travels fast;

This is an affordable omni wheel chassis car, which can be used for learning, racing DIY, etc.;

The car can control the rotation and drift through Bluetooth, WiFi and handle control kits. It is a robot platform suitable for off-road competition.

In order to facilitate transportation, the product is not assembled.

Free Shipping 29.9 pt.
29900 € 
Send Inquiry
Add to favorites
Share

Specification:

MC600 4WD Mecanum Wheel Car Chassis Parameters:

Panel color: Silver

Size: 37*30.2*10cm/ 14.6*11.9*3.9inch

Weight: 3.2k/ 7.1lb

Panel: 3mm thick aluminum alloy

Surface treatment: Sandblasting oxidation

Motor: High torque 37mm DC encoder motor

Maximum load: 15-20kg

Wheels: 100mm omnidirectional wheels, with left & right wheel, each containing 9 independent sub wheels


100mm Mecanum Wheel Parameters:

Wheel diameter: 100mm/ 4inch

Number of wheels: 4

Weight: 400g × 4pcs

Number of sub-wheels: 9

Number of plates each wheel: 2

Body material: Aluminum alloy

Roller material: PP+PE

Spacer Material: Nylon


37 Encoder DC Motor Parameters:

Rated voltage: 12V

Rated power: 4.8W

Motor type: permanent magnet brush

Stall current: 2.8A

Blocking torque: 10kgf.cm

Rated current: 360mA

Original speed: 11000rpm

Speedup ratio: 1:30


Encoder Parameters:

Type: AB phase incremental Hall encoder

Line speed: 390 (measured with the output shaft of the reducer)

Supply voltage: 5.0V